•Digital Still Camera
For capture of still images in dim lighting.
Before you begin...
• connect Camcorderto power source.
• Insert the CompactFlashCard(page 49).
• Set POWERto PHOTO.
RECORD/
PAUSE
Set LIGHT to AUTO.
When RECORD/PAUSE is pressed to
capture an image in dim lighting, the Light
comes on for about 2 seconds, the image
is captured, then goes out.
Or, set LIGHT to ON/OFF manually•
060 FINE _'_ PHOT 1
_ appears in EVF or LCD monitor when
Light is on.
Caution:
Light becomes hot. Never cover Light
while on.
Note:
• Using Light reduces battery operating
time.
• Provide proper ventilation when using
Light extensively in a hot environment.
• Using Light when the Camcorder is
powered by a car battery may shorten
bulb rife.
• Set Light to OFF when not in use.
52
To Next Page
Loading...
