Focus
MANUAL
FOCUS
Before you begin...
• connect Camcordertopower source.
• Set POWERto CAMERA.
Camcorder automatically focuses on
subject even during zooming.
Auto Focus is on when "MF" is not
displayed in EVF or LCD mor_itor. Push
MANUAL_FOCUS to remove "MF" in EVF
or LCD monitor if necessary.
Use Manual Focus (MF) when :
• recording through glass.
, lighting is poor.
• subject is far away with objects in foreground.
• subject has distinct hddzontal lines.
• subject is not centered in EVF or LCD monitor.
• subject has shiny surface.
• subject is slanted.
• subject is bright and flat. like a white wall.
• subject has fast motion, like a golf swing.
Push MANUAL FOCUS so "MF"
(Manual Focus) appears in EVF or
LCD monitor.
EVF or LCD
monitor
A
, I._ 2 Hold down "T" fteleDhoto} on
POWER ZOOM to maximum zoom
4,o
Turn MANUAL FOCUS until
subject is in focus.
• Backaway from subjectifnecessary,
Hold down "W" (wide angle) on
POWER ZOOM as desired.
. Refocus as needed
when aiming at new scenes.
Auto Focus functions up to 12.7 mm (1/2 inch) from subject.
Hold down "W" on POWER ZOOM to maximum wilde angle.
Bring Camcorder up close to the subject.
35