Capturedstillimages(pages50,51)can
berecordedalongwiththecurrentpicture.
Digital Still Camera
• . . -. vv , - - Before you begin...
• ConnectCamcorderto power source.
• Insert the CompactFlashCard (page 49).
- Set POWER to CAMERA,
1 MODE
Still image
f
p-p
Moving_.._
Picture _
Multi image playback page number
2
3
( P - P = Picture in Picture )
Set DIGITAL SELECT to DIGITAL
WIPE.
• A still image captured on the CF
card and the Multi image playback
page number is displayed on the
right side of the screen.
° If there are no recordings on the
card, "NO PICTURE" appears
on-screen.
Press _ or _ to select
still image to be used.
Start recording (page 23).
* When recording starts, Multi image I
playback number disappears. Then I (_
the capture still images can be }
recorded along with the current I
picture. I
, To exit from the Picture in Picture I _)_
Wipe title mode, press MODE t
/page58). I
Note: . t_
. It CompactFlash Card is not inserted, t _
"NO CF CARD" appears on-screen. Set L-----
Power to OFF, then insert the
CompactFlash Card.
, Pictures captured with other brand
products cannot be used with this
Camcorder.
° If "INCOMPATIBLE IMAGE" appears
on-screen, the size of the captured
image cannot be played back on this
Camcorder.
• If "CF CARD ERROR" appears
• on-screen, see page 80,
• If Picture in Picture Wipe Title selected
the following functions are not available:
Security mode, Auto Fade, Digital Fade,
Digital Filter, Digital Zoom, Digital E.I.S.,
Still/Strobe/Wide.
57
To Next Page
Loading...
