Playing Back Recordings
• . ;.' _, v -- =_ Before you begin...
• Connect Camcorder to power source.
f
Speaker
3i
PHONE
(earphone)
jack
• Insert recorded tape.
Press LCD-OPEN and swing LCD
monitor fully open.
• if you want to playback on EVF,
close and tock LCD monitor.
Set POWER to VCR.
Power lamp lights.
• If tape has no record tab, auto
playback begins.
• EVF or LCD monitor turns on/off by
the POWER switch.
EVF shuts off when LCD monitor is
opened and turns back on when
LCD is c_osed.
Playback function buttons.
O_
_) PLAY
_) BRIGHT
_) VOLUME
Press 'q"
Press "W"
Rewind tape.
Play tape.
Stop tape.
Adjust LCD monitor
brightness.
Adjust volume of
speaker, or earphone
if connected.
Volume up(+).
Volume down(-).
VOLUME[-] IIII .... [÷11
Note:
° Using LCD monitor reduces battery
operating time.
• Return LCD monitor to locked position
when not in use.
• When earphone (M3 type: not supplied) is
connected to PHONE jack, speaker is
muted.
29
To Next Page
Loading...
