Camera Recording
View recording scene on the LCD (Liquid
Crystal Display) monitor.
4
2
Before you begin...
• Connect Carncorderto power source,
° Insert cassettewith recordtab (page15).
Press LCD-OPEN to unlock LCD
monitor.
Swing LCD monitor fully open and
adjust viewing angle.
Caution:
Rotating partially open LCD monitor
may block cassette door and damage
Camcorder body.
Set POWER to CAMERA.
° EVF or LCD monitor turns on/off by
the POWER switch.
° EVF shuts off when LCD monitor is
opened and turns back on when
LCD is closed,
• Both EVF and LCD monitor turn on
3
when LCD is at 180 ° (see above
left).
This allows both you and the subject
tOview the recording.
Turn BRIGHT control to adjust LCD
monitor brightness level.
Press RECQRD/PAUSE to start
recording (page 23).
PHONE (earphone)
jack
Note:
• Using LCD monitor reduces battery
operation time.
° Retun LCD monitor to locked position
when not in use.
• To hear sound while recording, connect
earphone (M3 type: not supplied) to
PHONE jack. Earphone volume cannot be
changed while in CAMERA mode.
24
;[,] m=6_-tk-__ t, [,(=,'_.d II B:(l]0]PJili B ".#'J_r¢_rJY_
To Next Page
Loading...
