Camera Recording
If teft in RECORD/PAUSE mode for 5 minutes, Camcorder switches to Stand-by mode to
conserve battery. When set to ON, Stand-by Quick Release lets you resume recording by
pressing RECORD/PAUSE two times. New camcorders will default to OFF.
41fz,! _le] :v,ai-i =lal=I,,,T:,]
PAUSE
2,3,4
Before you begin...
, ConnectCarncordertopowersource.
• Insert cassettewith recordtab (page15).
Set POWER to CAMERA.
3
Press MENU for MENU mode,
Press UP & or DOWN V to select
4
%
/
PROGRi,JV_EO REC
13TtJ_ ; _ul'O,t t,ANU_*L
TALLy LAMp ; ON
_'t : PUSH r:t4_LAy KL"Y
: PUSH MENU
Press DISPLAY to select ON/OFF.
ON: From Stand-by mode,
press RECORD/PAUSE two times
to resume recording.
OFF: From Stand-by mode,
set POWER to OFF. then to
CAMERA.
Press RECORD/PAUSE to record.
Press MENU to exit.
25