Camera Recording
f,
For a smooth transition between scenes if
recording is stopped, and then started
within 24 hours.
Before you begin...
• ConnectCamcorderto power source.
° Insert cassettewith recordtab (page15),
1
2
Press RECORD/PAUSE to stop
recording.
Set POWER to OFF and leave
cassette in Camcorder.
•
3
2
4
To resume recording, set POWER
to CAMERA.
Press RECORD/PAUSE to resume
recording.
Note:
• Use Manual Easy Edil (below) if more than
24 hours before recording is resumed,
I,_ _,_ _ Before you begin...
For proper continuity when taping from Stop • ConnectCamcorderto powersource,
mode or after attaching a new Battery. • Insert cassettewith recordtab (paget5).
26
2
Set POWER to VCR.
r
3
4
3
_Press REWINDISEARCH to
rewind a few seconds of tape.
Press PLAY to review recording.
Press STILL where you want to
continue recording.
Set POWER to CAMERA.
Press RECORD/PAUSE to resume
recording.