Panasonic Palmcorder PV-GS200 - Adjusting White Balance Manually

RecordingMode
3 Press the [_] Button (_D or [<lq] Button
(_ to select a desired White Balance
Mode.
2,[C
1) Automatic White Balance Adjustment [AWB]
2) The white balance setting that was previously
sot manually [ &mA]
3) Outdoor Mode I-X-]
4j Indoor Mode {recording under incandescent
lamp) [=_]
To Resume Automatic Adjustment
Pressthe [IIH_]Button_ or[.II_I]Button
until the LAWB] Indication appears. Or, set the
[AUTO/MANUAL/FOCUS] Switchto[AUTO],
• About Black Balance Adjustment
BI;.tORBalance Adjustment is one of the functions
of the 3CCD system. It automatically adjusts the
hue of black color in the picture. When the Black
Balance Adjustment is activated, the screen
becomes dark for a moment,
O O e
OAdiusgng the BI;.toF(Balance {glinF(ing)
_Adjusting the White B;.danco {BlinRingj
OAdiustmont is completed. (Lit)
Adjusting White Balance Manually
White B;.tlanco Adjustment recognizes the color
of light ;.tnd adjusts so that white will become pure
white. The Camcorder determines the hue of fight
th;.tt comes through the Lens and the White
Balance Sensor, thereby judging the recording
condition, and selects the closest hue setting.
This function is called Automatic White Balance
Adjustment.
For light outside the functional Auto White
Balance Adjustment range, use the Manual White
Balance Adjustment Mode.
1 Set the [AUTO/MANUAL/FOCUS] Switch
(_ to [MANUAL].
2 Press the [ENTER] Button @.
• The LAWB] Indication appears.
3 Press the [1_1_] Button (3_ or [<1<1] Button
@ until the [&mA] Indication is displayed,
°"L1
4 Point the Camcorder at a full-screen white
subject.
5 Keep pressing [ENTER] Button @ until the
[&mA]Indication stops flashing,
TO Resume Automa#e Adjustment
Press the [1_1_] Button _ or [<_1] Button
until the [AWB] Indication is displayed. Or, set the
[AUTOiMANUAI31=OCUS] Switch to [AUTO].
• About White Balance Sensor
The White Bal;.tnco Sensor _ determines the
naturs of the light source during recording.
Do not cover the White Balance Sensor with
your hand during recording because White
Balance will not function normally.
•The red light from the Recording Lamp (_ will
be reflected Off your hand or an object, possibly
causing the White Balance sensor to operate
incorrectly and changing the coloring.
wTho[MNLJIndication appears.