Panasonic Palmcorder PV-GS200 - Slide Show

Playback: Mode
When you setecf MPEG4 Playback Mode at
Step 1(PV-GS200 only)
eFile is numbered in hexadecimal.
eWhen the object is moving fast or zoom
operation is performed, picture may appear to
be still or mocaio-pattem noise may appear, but
this is nota malfunction,
eWhen you select MPEG4 Playb:.tok Mode at
stop 1, during playback, push the
[-VOLiJOG÷j lever to display the volume
indication until the volume Indication appears
and adjast the volume. (_,_-)
--%,
O Folder File Number (When the picture is
played bac_:)
File Name _When the MPEG4 data is played
back) (PV-GS200 only)
I_ Picture Size Of#hen the picture is played bac_:)
Playback time (When MPEG4 d:.tta is played
back) (PV-GS200 only)
0 File Number
TO Select a #esired Fi_e and Playin 9 Back
1 Set the Mode Dial _ to Picture Playback
Mode or MPEG4 Playback Mode. (MPEG4
Playback Mode on PV-GS2O0 Model only)
2 Press the [MULTI] Button [_[).
• The tiles recorded on the Card are displayed
in Multi-Picture Mode.
.... i;
0 Picture Size [When Picture Playb;.tok Mode is
selected at Step 1)
_) File Number
Folder File Number 0Nhen Picture PI;.tyback
Mode is selected at Stop 1)
File N;.tmo [When MPEG4 Playback Mode is
selected at Step 1) {PV-GS200 only)
3 Press the [ii/]l/<l<ltl_l_] Button to select a
desired file.
• The selected file is marked with a frame.
4 Press either the [ENTER] Button @ or the
[MULTI] Button [_[).
eThe selected file is shown on the entire
screen,
• For other notes concerning this item, see -7_:.
Slide Show
The recorded still pictures in the Card can be
played back like a Slide Show.
1 Sot the Mode Dial _ to Picture Playback
Mode.
2 Press the [1_1 Button @.
eThe [SLIDEL_] Indication isdisplayed,
• Each of the pictures are pl;.tyedback for
several seconds.
To Pause the Slide Show
Press the [I l] Button,
• The [SLIDEI I] Indication is displ;.tyed.
To Stop the Slide Show
Press the [11]Button.
• For other notes concerning this item, see -7_:.
.-46-