Panasonic Palmcorder PV-GS200 - Protecting the Files on a Card; Writing Printing Data on a Card

Playback,:Mode
5 Press the [ENTER] Button _ or press the
[MULTI] Button _.
wThe selected title is displayed.
• Recording and Phctcshct RecordJng can be
made with pictures that have titles.
eA title can be displayed also by pushing [TITLE]
Button on the Remote Controller.
To Clear fhe Title Display
Set [DIGITALJ >> LTITLE IN] >> [OFF].
Or press [TITLE] Button (_D on the Remote
Controller.
• For othernotes concerning thisitem,see -_-.
Writing Printing Data on a Card
[DPOF Setting)
DPOF Setting Printing data [DPOF Settings),
such as the number of images to be printed, can
be written to the Cald. "DPOF" means Digital
Print Order Form;.tt.
1 Set the Mode Dial _ to Picture Playback
Mode.
2 Set [PICTURE PLAYBACK MENU] >>
[EDITING] >> [DPOF SET] >> [YES] >>
[VARIABLE],
• For othernotes concerningthisitem, see -_7-.
5 Repeat Steps 3 and 4 and press the [MENU]
Button _ when the setup is completed.
To Verify _POF Setfing
Select LVERIFY'I in Step 2. The pictures for which
1 or more print is set in DPOF are pit.tyed back
continuously.
• For othernotes concerningthisitem, see -_7-.
Protecting the Files on a Card
]Lock Setting]
Precious files recorded on a C;.trd can be locked
to prevent accidental erasure. (Even iffiles are
locked, the files will be deleted if the Card is
formatted.)
1 Set [PICTUREJN]PEG4 PLAYBACK MENU]
>> [EDITING] >> [FILE LOCK] >> [YES].
[[MPEG4 PLAYBACK MENU] on PV=GS2O0
Model only]
2 Select the file to be locked, and press the
[ENTER] Button (_.
eThc selected file islocked and the [o-w ]
Indication 0 appears. I_cpcat this procedure
to Ice_,:2 or more files.
ePross the tENTER l Button @ ;.tgain to
cancel.
• The SD Memory Card has a wdte protection
switch. (-;'?-)
• When all images arc not printed, select
[ALL 0].
3 Select a desired picture and press the
[ENTER] Button (_.
• The selected picture is marked with a frame.
• The number of prints sot by DPOF O is
displayed.
4 Press the [b,IP] Button (_ or [<1<1] Button
(_ to select the number of pictures to be
printed, and press the [ENTER] Button @.
• [OJ Indication _1 is displayed in the picture
sot.{-_-)
• This is not the setting of the number of prints
for printing on PictBridge. (-._4-) -48-