O_hers
WEB i_ : WEB CAMERA Modo (recording)
-59-
WEB [] : WEB CAMERA Mode [playbLtck)
-59-
PRINT (Highlighted):
PictBddgo Mode -._4-
0h00m00s: Recording time of MPEG4
(PV-GS200 only)
VOLUME: Volume adjustment -_-
3:30:45PM: Date_ime Indication
N IF, E): Photcshot PJuture Quality (dudng
Phctoshotrecording)
iF] means Fine, iN] means
Normal and IE] means Economy.
-29-
MPEG4 Picture Qualily
(PV-GS200 only) -30-
Remaining Number of Photcshct
piutures
Remaining time of MPEG4
(PV-GS200 only)
Rap[dFire Consccufivo
Photoshot Recording -3e-
Lock Setting 4_
DPOF Setting completed (set fo
1 or more picture) 4,_-
11780x1320] Imago size
(PV-GS200 only)
11280x960] Im;.tgo size
(PV-GS120 only)
[_: 1840x4801 Image size
eFcr imagos not recorded with this Camcordcr,
the size d[splLty is determined ;._sfollows
according fo the number of horizontal p[xels.
[_: 840 or more, loss than 800 (The
size isnot displayed at under
840 pixels.)
_: 800 or more, loss than 1024
_: 1024 or more, less fhan 1280
_: 1280 or more, less fhan 1800
_: 1600 or more, less fhan 2048
[_: 2048 or more
{Cyan): Photcshot Mode
{Rod): While Photoshot recording is
Ltctivatcd
{Green): While the card is being road
(Rod): No Card (Still Picture Mode)
{Oyan): Moving Picture {MPEG4)
Recording Mode
(PV-GS200 only)
{Rod): While Moving Piuture (MPEG4)
recording is activated
(PV-GS200 only)
[],[],[],_:
0:
R:0h00m:
O:
O-mr:
I (White):
[_:
_: Flash turned on (PV-GS200 only)
$+: Flash {setting to [+])
(PV-GS200 only) -3L_-
_-: Flash {setting to [-])
(PV-GS200 only) -3L_-
_!_': Rod Eye Reduction
(PV-GS200 only) -._-
• To Change the Counter Display Mode
By changing [C.DISPLAY l on the [DISPLAYJ
Sub-Menu, you can change the Counter Display
Mode to Tape Ccunfor IndiuLttor [COUNTER l
{0:00.00), Memory Counter Indicator [MEMORY]
{M0:00.00), or Time Code IndicLttor LTIMECODE]
{0h00m00s00f). (-22-)By repeatedly pressing the
[DISPLAY] Button on the Remote Confrcllor, you
can change the Counter Display Mode.
• To Display Date/Time Indicator
To display Date!rime Indicator, sot the
appropriate DatcFl-ime in [DATE,TIME] on fho
[DISPLAY] Sub-Menu. {-'22-)
You can also press the [DATEFI-IME] Button of
the Remote Controller repeatedly fo display or
change the DateTl'imo Indicator.
• To Change the Display Mode
By changing [DISPLAYJ on tho [DISPLAYJ
Sub-Menu, you can change the Display Mode fo
All Function Display [ALLJ and Minimum Display
[OFF]. {-22-)
• Progressive Photoshot
YOUcannot uso fho Progressive Photoshot
Function Jnthe following cases.
When using Tape Recording Mode
eDig[tal Effect Modes Jn[EFFECT1]
• Dig[fal Zoom [D.ZOOM]
1/750 s or faster shutter speed
•Whon brighfness is insufficienf
•Whon the MLtgicPix Funution is ON
•When PoriraJf Mode is usod
When using Card Recording Mode
•Whon bdghfness is insuffic[enf
Initializing the Modes
YOUcan chLtngo the Menu settings bLtck to the
shipping condition.
1 Set L-rAPE RECORDING MENU] or
[GARB RECORDING MENU] >> [INITIAL] >>
[INITIAL SEll >> [YES].
eln[t[al[zJngfakes a little while.
eAticr initializing is completed, the
[COMPLETED l Indicator appears.
Initializing will not erase the sleek setting (-25-)
that h_s been adjusted.
-6.e-
To Next Page
Loading...
