Editing Mode
• The [PRINTj Indic;.ttion does net appear when
the card is not inserted in the Camcarder. (You
cannot print pictures.)
• When the [PRINTj Indication keeps blinking
(more than about 1 minute), 1he Cams•taler and
the printer are not connected properly. Connect
the cable again or chock the printer.
• When the Camcerdor and the printer are
connected in the Tape Rocordin_Playbaek
Mode, the [WEB J ] or the [WEB [] ]
Indication may appear on the LeD Monitor.
However, imagos cannot be printed.
3 Select the desired picture and press the
[ENTER] Button (_.
• Imagos cannot be printed when they are
displayed in Multi-screen.
4 When printing with date:
Set [PICTURE PLAYBACK MENU] >>
[PRINT] >> [DATE] >> [ON],
• You cannot set date printing when the printer
does not support it.
• Proceed to the next stop if you do not need
date printing.
5 Set [PICTURE PLAYBACK MENU] >>
[PRINT] >> [THIS PICTURE] >> a desired
paper size.
• You cannot set a paper size which is net
supported by the printer.
6 Press the [1_1_] But'ton _ or [44] Button
(_ to select a desired number of prints.
• You can sot the number of prints up to 9.
7 Press the [ENTER] Button (_.
ff you want to stop printing halfway
Press the [H l Butlen (_.
ode not operate as follows during prfngng,
pictures cannot be prfnted properly.
• Disconnecting the USB cable
• Removing the Card
• Switching the operation mode
-55-
To Next Page
Loading...
