EasyManua.ls Logo

Panasonic Palmcorder PV-GS200 - About the SD Memory Card and MultiMediaCard

Panasonic Palmcorder PV-GS200
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
With a PC
When the Carncorder rs switched to the PC
Mode while it is connected to the personal
computer, "PC ACCESSING" is displayed on
the Carncorder and the operation mode of the
Camcorder cannot be switched. In this case,
disconnect the USB Connection Cable. Switch
the operation mode of the Carnccrdor and
reconnect the Cable.
If the Camcorder is connected in the PC Mode,
the [Removable Dis_:] icon representing the
Memory Card drive is displayed in
[My ComputerJ.
eWhen the Tape Recording Mode Ofthe
Carncorder is switched to the PC Mode, a
warning moscage may be displayed. You may
simply ignore it.
eWhen you are using Windows XP or Windows
2000, you may install or uninstall this sol[ware
afler logging ON by setting the user name to
Administrator or to a user name having
equivalent authority.
If you use Windows 98SEiMe, the message,
"File is not found" may be displayed when the
Carncorder isconnected for the first time. Enter
the following paths to complete the connection:
If the moscage "MTDVgCM3.pdr is not found" is
displayed, enter
"C:\WINDOWS_ystem\IOSUBSYS'. If the
message =MTDV98M3.sys is not found" is
displayed, enter
"C:\WINDOWS\syctem32\D RIVE RS'.
(The paths will differ depending on the
environment of your personal computer.)
If you install the USB Driver while the USB
Connecting Cable is being connected, or if you
do not follow those Operating Instructions, the
Carncorder will not be recognized correctly. In
this case, delete the USB Driver from
[Device ManagerJ as described below, uninstall
the USB Drfver, and re-install it.
O Set the Carnccrder to Tape Recording Mode
or Tape Playback Mode, connect itto the
personal computer, and delete [Panasonic
DVC USB-SERIAL Driver for Win XX
(COM X)] (or [Pacasonic Serial USB DriverJ)
from [Device Manager J.
The numeral designation after =Win XX" will
differ depending on the OS. (Win 98,
Win Me, Win 2000, Win XP)
I_ Set the Camcorder to PC Mode and delete
[Panasonio DVC SD Disk Drive] (or
[Panasonio DVC USB Storage]) {Windows
98SE).
About the SD Memory Card and
MultiMediaCard
SD Memory Card
The SD Memory Card (supplied) is virtually the
same size as a MultiMediaCard. It is an external
Memory Card that is available in larger
capacities. It has a write protectswitch to prevent
data writing and card formatting, as well as a
copyright protection function.
SD Logo is a trademark.
MultiMediaOard
The MultiMediaCard is a compact, lightweight
and removable external Memory Card.
iAII other company and product names in the
oper, tting instructions are trademarks or
registered trademarks of their respective
corporations.
Files recorded on a SD Memory Card or
MultiMediaCard
It may not be possible to play back the files on
this Camccrder recorded on and created by other
equipment or vice versa. For this reason, check
the compatibility of the equipment in advance.
About the compatibility of the card
files
Data files recorded on an "SD Memory Card_or a
=MultiMediaCard' by this Camcorder conform with
DCF (Design rule for Camera File system)
established by JEITA (Japan Electronics and
Information Technology Industries Association).
If you attempt to play back files recorded with
this Camcorder on other equipment or to play
back files recorded with other equipment on this
Camcorder, you may not be able to play them
back. Please chock the compatibility with the
other equipment in advance.
-66-

Table of Contents

Related product manuals