Panasonic PT-EZ590

Chapter 5 Operation of Function — Web control function
ENGLISH - 121
Descriptions of items
1
2
3
4
5
6
7
1 Page tab
Pages are switched by clicking this item.
2 [Status]
The status of the projector is displayed by clicking this item.
3 [Projector control]
The [Projector control] page is displayed by clicking this item.
4 [Detailed set up]
The [Detailed set up] page is displayed by clicking this item.
5 [Change password]
The [Change password] page is displayed by clicking this item.
6 [Crestron Connected(TM)]
The control page of Crestron Connected
TM
is displayed by
clicking this item.
7 [Download]
The download page of Presenter Light software is displayed by
clicking this item. (x page 116)
[Projector status] page
Click [Status]
→
[Projector status].
Display the status of the projector for the following items.
14
15
6
7
8
9
1
2
3
4
5
10
11
12
13
1 [PROJECTOR TYPE]
Displays the type of the projector.
2 [MAIN VERSION]
Displays the rmware version of the projector.
3 [POWER]
Displays the status of the power.
4 [SHUTTER]
*1
Displays the status of the shutter (ON: closed, OFF: open).
5 [PICTURE MODE]
Displays the setting status of [PICTURE MODE].
6 [SERIAL NUMBER]
Displays the serial number of the projector.
7 [LAMP POWER]
Displays the setting status of [LAMP POWER].
8 [VOLUME]
Displays the volume status.
9 [REMOTE1 STATUS]
Displays the status of the contact control.
10 [INPUT]
Displays the status of the selected input.
11 [INTAKE AIR TEMPERATURE]
Displays the status of the air intake temperature of the projector.
12 [EXHAUST AIR TEMPERATURE]
Displays the status of the exhaust air temperature of the
projector.
13 [LAMP RUNTIME]
Displays the runtime of the lamps (converted value).
14 [SELF TEST]
Displays the self-diagnosis information.
15 [PROJECTOR RUNTIME]
Displays the runtime of the projector.
*1 [SHUTTER] is for PT-EZ590, PT-EW650 and PT-EX620.
[AV MUTE] is for PT-EW550 and PT-EX520. Displays the status of the AV mute.
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status]
screen, click it to display the error/warning details.