Chapter 4
Settings — [DISPLAY OPTION] menu
82 - ENGLISH
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f
The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [WARNING MESSAGE].
4) Press qw to switch the item.
f
The items will switch each time you press the button.
[OFF] Hides the warning message.
[ON] Displays the warning message.
Note
f
When [WARNING MESSAGE] is set to [OFF], the warning message will not be displayed on the projected image even if a warning status
such as lamp replacement, temperature warning or air lter replacement is detected.
[RGB IN]
Set to match the signal to input to the <RGB 1 IN> terminal and the <RGB 2 IN> terminal.
Setting [RGB1 INPUT SETTING]
Switches the input for the <RGB 1 IN> terminal.
1) Press as to select [RGB IN].
2) Press the <ENTER> button.
f
The [RGB IN] screen is displayed.
3) Press as to select [RGB1 INPUT SETTING].
4) Press qw to switch the item.
f
The items will switch each time you press the button.
[RGB/YP
B
P
R
] Select when you want to input the RGB signal or YP
B
P
R
(YC
B
C
R
) signal to the <RGB 1 IN> terminal.
[Y/C] Select when you want to input a luminance signal and a color signal to the <RGB 1 IN> terminal.
Setting [RGB2 EDID MODE]
1) Press as to select [RGB IN].
2) Press the <ENTER> button.
f
The [RGB IN] screen is displayed.
3) Press as to select [RGB2 EDID MODE].
4) Press the <ENTER> button.
f
The [RGB2 EDID MODE] screen is displayed.
5) Press qw to switch [EDID MODE].
f
The items will switch each time you press the button.
[DEFAULT] Standard setting.
[SCREEN FIT] Changes EDID data according to the [SCREEN FORMAT] setting.
[USER] Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID.
f
When [DEFAULT] or [SCREEN FIT] is selected, proceed to Step 10).
6) Press the <ENTER> button.
f
The [RESOLUTION] screen is displayed.
7) Press as to select [RESOLUTION].
f
Select [1024x768p], [1280x720p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p], [1440x900p],
[1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i] or [1920x1200p].
8) Press the <ENTER> button.
To Next Page
Loading...
