EasyManua.ls Logo

Panasonic PT-EZ590

Panasonic PT-EZ590
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4
Settings — [DISPLAY OPTION] menu
ENGLISH - 87
f
[SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMAT] is set to the following
item.
PT-EZ590, PT-EW650 and PT-EW550: [16:10]
PT-EX620 and PT-EX520: [4:3]
6) Press qw to adjust the [SCREEN POSITION].
f
The items will switch each time you press the button.
r
When [SCREEN FORMAT] is [16:9]
[CENTER] The image which aspect ratio is 16:9 will displayed in the center.
[HIGH] The image which aspect ratio is 16:9 will displayed at the top.
[LOW] The image which aspect ratio is 16:9 will displayed at the bottom.
r
When [SCREEN FORMAT] is [4:3]
(Only for PT-EZ590)
[CENTER] The image which aspect ratio is 4:3 will displayed at the center.
[LEFT] The image which aspect ratio is 4:3 will displayed in the left.
[RIGHT] The image which aspect ratio is 4:3 will displayed at the right.
[STARTUP LOGO]
Set the logo display when the power is turned on.
1) Press as to select [STARTUP LOGO].
2) Press qw to switch the item.
f
The items will switch each time you press the button.
[DEFAULT LOGO] Displays the Panasonic logo.
[USER LOGO] Displays the image registered by the user.
[OFF] Disables the startup logo display.
Note
f
The startup logo will disappear in approximately 30 seconds.
f
To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[SHUTTER SETTING]
(Only for PT-EZ590, PT-EW650 and PT-EX620)
Enable/disable the shutter function automatically (shutter: closed/open) when the power is turned on.
Setting [STARTUP]
1) Press as to select [SHUTTER SETTING].
2) Press the <ENTER> button.
f
The [SHUTTER SETTING] screen is displayed.
3) Press as to select [STARTUP].
4) Press qw to switch the item.
[OPEN] Starts projection with the shutter function disabled (shutter: open) when the power is turned on.
[CLOSE] Starts projection with the shutter function enabled (shutter: closed) when the power is turned on.
Setting [SHUT-OFF]
1) Press as to select [SHUTTER SETTING].
2) Press the <ENTER> button.
f
The [SHUTTER SETTING] screen is displayed.
3) Press as to select [SHUT-OFF].

Table of Contents

Related product manuals