Panasonic PT-EZ590

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 91
2) Press the <ENTER> button.
f
The [OTHER FUNCTIONS] screen is displayed.
3) Press as to select the item.
[AUTO SETUP]
Automatically adjust the resolution, the clock phase and the image position when analog RGB signals
consisting of bitmap images such as computer signals are being input, or to automatically adjust the
image position when HDMI signals are input.
For details, refer to "Using the automatic setup function". (
Æ page 55)
[FREEZE]
The projected image is paused temporarily and the sound stopped regardless of the playback of the
external equipment.
Press the <MENU> button on the remote control to release this function.
Also press the <RETURN> button or the <FREEZE> button on the remote control to release this
function.
[SHUTTER]
*1
Enable/disable the shutter function automatically (shutter: closed/open) when the power is turned on.
[AV MUTE]
*2
Turn off audio and image when the projector is not used for a certain period of time. To release this
function, press the <RETURN> button or the <AV MUTE> button on the remote control.
[DIGITAL ZOOM]
Enlarge images and move the image zoom position.
For details, refer to "Using the digital zoom function". (
Æ page 58)
*1 Only for PT-EZ590, PT-EW650 and PT-EX620
*2 Only for PT-EW550 and PT-EX520
4) Press the <ENTER> button.
Using the digital zoom function via the menu operation
(Only for still image-based RGB signals/still image-based HDMI signals/still image-based DIGITAL LINK signals
input)
1) Press as to select [DIGITAL ZOOM].
2) Press the <ENTER> button.
f
The [DIGITAL ZOOM] individual adjustment screen is displayed.
3) Press qw to adjust the magnification.
Operation menu Operation Adjustment Adjustment range
Press the w button.
Increases magnication.
1.0 ~ 3.0
Press the q button.
Decreases magnication.
4) Press the <ENTER> button.
f
The moving screen is displayed.
5) Press asqw to move the zoom position.
f
For details, refer to “Using the digital zoom function”. (
Æ
page 58)
Note
f
Magnication can be set from 1.0x to 3.0x in 0.1 increments.
f
The digital zoom function is canceled if the <D.ZOOM -> button/<D.ZOOM +> button is pressed for three seconds or more.
f
The digital zoom function is canceled if the input signal changes during a digital zoom.
f
During a digital zoom, the freeze function is disabled.
f
The digital zoom function may not work properly for some still image-based signals.