Panasonic PT-EZ770 Series

Chapter 6 Appendix — Precautions for Ceiling Mount Bracket
ENGLISH - 151
Precautions for Ceiling Mount Bracket
f When installing the projector to a ceiling, be sure to use the optional Ceiling Mount Bracket (Model No.: ET-PKE200H (for High Ceilings),
ET-PKE200S (for Low Ceilings), ET-PKE200B (Projector Mount Base)) specied by Panasonic Connect Co., Ltd. Ceiling Mount Bracket
(Model No.: ET-PKE200H (for High Ceilings), ET-PKE200S (for Low Ceilings)) is used in combination with Ceiling Mount Bracket (Model
No.: ET-PKE200B (Projector Mount Base)).
f When installing the projector, attach the drop-prevention wire supplied with the Ceiling Mount Bracket (Model No.: ET-PKE200B (Projector
Mount Base)).
f Ask a qualied technician to do the installation work such as mounting the projector on the ceiling.
f Panasonic Connect Co., Ltd. takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket not
manufactured by Panasonic Connect Co., Ltd. or the inappropriate choice of location for installation, even if the warranty period of the
projector has not expired.
f Unused products must be removed promptly by a qualied technician.
f Use a torque screwdriver or Allen torque wrench to tighten bolts to their specied tightening torques. Do not use electric screwdrivers or
impact screwdrivers.
f Read the Installation Instructions for the Ceiling Mount Bracket for details.
f The model numbers of accessories and optional accessories are subject to change without prior notice.

M6
Bottom view
Model No. of Ceiling Mount Bracket: ET-PKE200H (for High Ceilings)
ET-PKE200S (for Low Ceilings)
12 mm (15/32")
Torque: 4 ± 0.5 N·m
ET-PKE200B (Projector Mount Base)