Panasonic PT-EZ770 Series

Chapter 4 Settings — [DISPLAY OPTION] menu
82 - ENGLISH
4) Press the <MENU> button three times to clear.
f The start time is displayed at the bottom right of the projected image.
Note
f Presentation timer operations are also possible by the <P-TIMER> button on the remote control. (x page 51)
f The security message set in the [SECURITY] menu → [DISPLAY SETTING] (x page 103) is not displayed when the elapsed time or
remaining time is displayed.
f The elapsed time or remaining time are not displayed when the menu screen is displayed.
f The start time becomes “000:00” when [MODE] is set to [COUNT UP].
f When [MODE] is set to [COUNT DOWN], the start time becomes the value set at [TIMER].
f The time gauge turns clockwise when [COUNT UP] is set, and turns counterclockwise when [COUNT DOWN] is set.
Ending the presentation timer
1) Press as to select [P-TIMER].
2) Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3) Press as to select [EXIT].
4) Press the <ENTER> button.
[FREEZE]
The projected image is paused and audio turned off regardless of the playback of the external device.
1) Press as to select [FREEZE].
2) Press the <ENTER> button.
f Press the <MENU> button to release.
Note
f [FREEZE] is displayed on the screen when video is paused.
[DIGITAL ZOOM]
Enlarge images and move the image zoom position.
ABC
ABC
ABC
ABC
ABC
Fig. 1
1) Press as to select [DIGITAL ZOOM].
2) Press the <ENTER> button.
f The [DIGITAL ZOOM] screen is displayed.
3) Press qw to adjust the magnification.
Operation Adjustment Range of adjustment
Press w.
Raises the magnication.
+1.0 - +2.0
Press q.
Lowers the magnication.
4) Press the <ENTER> button.
5) Press asqw to move the zoom position. (Fig. 1)