Panasonic PT-EZ770 Series

Chapter 4 Settings — [PROJECTOR SETUP] menu
92 - ENGLISH
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select the audio input.
4) Press qw to switch the item.
f The items will switch each time you press the button.
[AUDIO IN 1]
Audio connected to the <AUDIO IN 1> terminal is output at projection of images from a preset input
terminal.
[AUDIO IN 2]
Audio connected to the <AUDIO IN 2> terminal is output at projection of images from a preset input
terminal.
[AUDIO IN 3]
Audio connected to the <AUDIO IN 3> terminal is output at projection of images from a preset input
terminal.
[HDMI AUDIO IN]
*1
HDMI audio is output.
[DIGITAL LINK AUDIO IN]
*2
DIGITAL LINK audio is output.
[DisplayPort AUDIO IN]
*3
DisplayPort audio is output.
*1 Only when the input terminal is HDMI
*2 Only when the input terminal is DIGITAL LINK
*3 Only when the input terminal is DisplayPort
[STATUS]
Display the status of the projector.
1) Press as to select [STATUS].
2) Press the <ENTER> button.
f The [STATUS] screen is displayed.
3) Press qw to switch the pages.
f The page will change each time you press the button.
[INPUT] Displays the input terminal currently selected.
[SIGNAL NAME] Displays the input signal name.
[SIGNAL FREQUENCY] Displays the frequency of the input signal.
[PROJECTOR RUNTIME] Displays the operation times of the projector.
[LAMP : ECO]
*1
Converts the total lamp runtime when [LAMP POWER] is set to [ECO1] and [ECO2] into the runtime
when set to [ECO2], and displays the converted runtime.
[LAMP : NORMAL] Displays the lamp runtime when [LAMP POWER] is set to [AUTO] and [NORMAL] by actual time.
[LAMP : TOTAL]
*1
Converts the cumulative lamp runtime into the runtime when set to [NORMAL], and displays the
converted runtime.
[INTAKE AIR TEMP.] Displays the status of the air intake temperature of the projector.
[AROUND LAMP TEMP.] Displays the status of the temperature around the lamp of the projector.
[PROJECTOR TYPE] Displays the type of the projector.
[SERIAL NUMBER] Displays the serial number of the projector.
[LAMP UNIT MODEL NO.] Displays the model no. of the lamp unit.
[LAMP SERIAL NUMBER] Displays the serial number of the lamp.
[MAIN VERSION] Displays the main version of the rmware of the projector.
[SUB VERSION] Displays the sub version of the rmware of the projector.
[NETWORK VERSION] Display the network version of the projector.
[EMULATE] Displays the [EMULATE] settings.
[ON COUNT]
[POWER ON TIMES] Displays the number of times the power is turned on.
[LAMP ON] Displays the number of times the lamp is turned on.
[SHUTTER] Displays the number of times the shutter is closed.
[NUMBER OF REGISTERED
SIGNAL]
Displays the number of registered signals.
[REMOTE2 STATUS] Displays the control status of the REMOTE2.