Chapter 4 Settings — [PICTURE] menu
ENGLISH - 65
sRGB-compliant video
sRGB is an international standard (IEC61966-2-1) for color reproduction dened by IEC (International Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1) Set [COLOR ADJUSTMENT] to [OFF].
f Refer to [COLOR ADJUSTMENT] (x page 73).
2) Set [COLOR CORRECTION] to [OFF].
f Refer to [COLOR CORRECTION] (x page 73).
3) Display the [PICTURE] menu.
f Refer to “[PICTURE] menu” (x page 60).
4) Press as to select [PICTURE MODE].
5) Press qw to set [NATURAL].
6) Press as to select [COLOR].
7) Press the <DEFAULT> button on the remote control to set the factory default setting.
8) Follow Steps 6) - 7) to set [TINT], [COLOR TEMPERATURE], and [GAMMA] to the factory default
settings.
9) Display the [PICTURE] menu.
10) Press as to select [DAYLIGHT VIEW].
11) Press qw button to set [OFF].
Note
f sRGB is available for RGB signal input only.
To Next Page
Loading...
