ENGLISH - 9
Features of the Projector
High luminance and high contrast
▶ A high luminance of 7 500 lm
*1
and a high
contrast of 5 000:1 are achieved by means
of a unique optical system and lamp drive
system.
*1 For PT-EX800T
7 000 lm for PT-EW730T, and 6 500 lm for the PT-EZ770T
Easy and highly exible setup
▶ Easy and highly exible setup is achieved
by DIGITAL LINK compatibility, an electric
lens shift function, and a lineup of various
optional lenses.
Reduced maintenance costs
▶ Maintenance costs are reduced by use of
an extended-life lter and a recommended
lamp replacement interval of 4 500 H
*1
.
*1 When [LAMP POWER] is set to [ECO2]
This time is only the target for replacement and not the
warranty time.
Energy conservation achieved
through the ECO function
▶ Lamp power is optimized according to the
input image.
*1
Power consumption is also
reduced by optimizing the lamp power
according to the brightness of the setup
installation location, state of the input
signals and state of the video mute.
*2
*1 When [LAMP POWER] is set to [AUTO]
*2 When [ECO MANAGEMENT] is set to [ON]
Quick Steps
For details, refer to the corresponding pages.
1. Set up the projector.
(x page 29)
2. Attach the Projection Lens.
(x page 37)
3. Connect with external devices.
(x page 38)
4. Connect the power cord.
(x page 43)
5. Switch on the projector.
(x page 44)
6. Make initial settings.
(x page 20)
f Take this step when you switch on the power for the
rst time after purchasing the projector.
7. Select the input signal.
(x page 47)
8. Adjust the image.
(x page 47)
To Next Page
Loading...
