Panasonic PT-RZ575

Chapter 5 Operations — Web control function
ENGLISH - 141
Descriptions of items
1
2
3
4
5
6
1 Page tab
Switches pages by clicking this item.
2 [Status]
The status of the projector is displayed by clicking this item.
3 [Projector control]
The [Projector control] page is displayed by clicking this item.
4 [Detailed set up]
The [Detailed set up] page is displayed by clicking this item.
5 [Change password]
The [Change password] page is displayed by clicking this item.
6 [Crestron Connected(TM)]
The operation page of Crestron Connected
TM
is displayed by
clicking this item.
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
13
16
17
6
9
7
8
1
2
3
4
5
10
11
12
15
14
1 [PROJECTOR TYPE]
Displays the type of the projector.
2 [MAIN VERSION]
Displays the rmware version of the projector.
3 [POWER]
Displays the status of the power.
4 [SHUTTER]
Displays the status of the shutter function ([CLOSE]: Enabled
(closed), [OPEN]: Disabled (open)).
5 [OPERATING MODE]
Displays the setting status of [OPERATING MODE].
6 [SERIAL NUMBER]
Displays the serial number of the projector.
7 [OSD]
Displays the status of the on-screen display.
8 [VOLUME]
Display the volume status.
9 [LIGHT OUTPUT]
Displays the setting status of [LIGHT OUTPUT].
10 [INPUT]
Displays the status of the selected input.
11 [INTAKE AIR TEMPERATURE]
Displays the status of the intake air temperature of the projector.
12 [OPTICS MODULE TEMPERATURE]
Displays the status of the internal temperature of the projector.
13 [EXHAUST AIR TEMPERATURE]
Displays the status of the exhaust air temperature of the
projector.
14 [LIGHT TEMPERATURE1], [LIGHT TEMPERATURE2]
Displays the temperature status of the light source.
15 [LIGHT]
Displays the lighting status and runtime of the light source.
16 [SELF TEST]
Displays the self-diagnosis information.
17 [PROJECTOR RUNTIME]
Displays the runtime of the projector.