Panasonic PT-RZ575

Chapter 1 Preparation — About your projector
24 - ENGLISH
About your projector
Remote control
1
2
6
5
7
8
9
16
18
19
17
10
11
4
3
13
5
12
14
15
23
24
20
21
22
Front Top
Bottom
1 Power <v/b> button
Sets the projector to the state where the projector is turned
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
Sets the projector to projection mode when the power is
switched off (standby mode).
2 Remote control indicator
Blinks if any button in the remote control is pressed.
3 Lens buttons (<FOCUS>, <SHIFT>)
Adjusts the projection lens. (x page 51)
The <ZOOM> button is not used with the projector.
4 <MENU> button/<RETURN> button/<ENTER> button/
asqw buttons
Used to navigate through the menu screen. (x page 61)
asqw buttons are also used to enter the password in
[SECURITY] or enter characters.
5 <VOL
- > button/<VOL+> button
Adjusts the volume of audio output. (x page 55)
6 <DEFAULT> button
Resets the content of the sub-menu to the factory default.
(x page 62)
7 Input selection buttons (<HDMI 1>, <HDMI 2>, <DIGITAL
LINK>, <COMPUTER 1/2>, <VIDEO>, <DVI-D>)
Switches the input signal to project. (x page 50)
8 Number (<0> - <9>) buttons
Used for entering an ID number or a password in a multiple
projector environment.
9 <ON SCREEN> button
Switches the on-screen display function on (display) or off
(hide). (x page 55)
10 <ID ALL> button
Used to simultaneously control all the projectors with a
single remote control in a multiple projector environment.
(x page 28)
11 <ECO> button
Displays the setting screen relating to ECO management. (x
pages 58, 101)
12 <AUTO SETUP> button
Automatically adjusts the image display position while projecting
the image.
[PROGRESS] is displayed while in automatic adjustment.
(x page 56)
13 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
(x page 57)
14 <TEST PATTERN> button
Displays the test pattern. (x page 57)
15 <ID SET> button
Sets the ID number of the remote control in a multiple projector
environment. (x page 28)
16 <SCREEN ADJ> button
Used to correct the distortion of the projected image. (x pages
56, 74)
17 <FREEZE> button
Used when pausing the image and turning off the audio.
(x page 55)
18 <P IN P> button
Switches the picture in picture function setting. (x page 57)
19 <STATUS> button
Displays the projector information.
20 <SHUTTER> button
Used when temporarily turning off the image and audio.
(x page 54)
21 <MUTE> button
Used when temporarily turning off the audio. (x page 54)
22 <ASPECT> button
Switches the aspect ratio of the image. (x page 57)
23 Remote control signal transmitter
24 (Not available with this projector)
Attention
f Do not drop the remote control.