Chapter 5āOperations ā Web control function
ENGLISH - 151
Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== Panasonic project or report(ERRO R) ===
Projector Type : RZ 575
Serial No : 123456789012
----- check system -----
MAIN CPU BUS [ OK ]
FAN [ OK ]
INTAKE AIR TEMPERATURE [ OK ]
OPTICS MODULE TEMPERATURE [ OK ]
EXHAUST AIR TEMPERATURE [ OK ]
LIGHT TEMPERATURE1 [ OK ]
LIGHT TEMPERATURE2 [ OK ]
LIGHT STATUS [ OK ]
INTAKE AIR TEMP.SENSOR [ OK ]
OPTICS MODULE TEMP.SENSOR [ OK ]
EXHAUST AIR TEMP.SENSOR [ OK ]
LIGHT TEMP. 1 SENSOR [ OK ]
LIGHT TEMP. 2 SENSOR [ OK ]
BATTERY [ OK ]
COLO R WHEEL [ OK ]
LENS MOUNT ER [ OK ]
BRIGHTNESS SENSOR [ FAILED ]
ANGLE SENSOR [ OK ]
ATM SENSOR [ OK ]
PHOSPHOR WHEEL [ OK ]
(Error code 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00)
Intake air temperature : 28 degC / 82 degF
O pt ics module t emperat ure : 35 degC / 95 degF
Exhaust air temperature : 29 degC / 84 degF
Light t emperature1 : 44 degC / 111 degF
Light t emperature2 : 28 degC / 82 degF
PROJECT O R RUNT I ME 16 H
POWER O N 72 t imes
LIG HT RUNT IME 16 H
LIG HT O N 78 times
-------- Current status ---------
MAIN VERSION 1. 00
SUB VERSION 1.00
LIGHT STATUS LIGHT=ON
INPUT CO MPUTER1
SIGNAL NAME 1024x768
SIGNAL FREQ UENCY 48.22kHz / 59. 85Hz
----- Wired Network configuration -----
DHCP Client OFF
IP address 192. 168. 0. 8
MAC address 12:34: 56: 78: 90: 12
Mon Jan 01 12: 34: 56 20XX
----- Memo -----
To Next Page
Loading...
