Panasonic PT-RZ575

Chapter 7 Appendix — Technical information
168 - ENGLISH
r FREEZE
Performance Parameter Default value
No operation 0-31
128
OFF 32-95
No operation 96-159
ON 160-223
No operation 224-255
r COLOR, TINT
Performance Parameter Default value
No operation 0-31
0
Factory default setting 32-63
- 31 64
… …
0 128-129
… …
+31 191
No operation 192-255
r RASTER PATTERN
Performance Parameter Default value
No operation 0-15
0
OFF 16-31
WHITE 32-47
YELLOW 48-63
CYAN 64-79
GREEN 80-95
MAGENTA 96-111
RED 112-127
BLUE 128-143
BLACK 144-159
USER LOGO 160-175
No operation 176-255
r AUDIO VOLUME
Performance Parameter Default value
No operation 0-31
0
Factory default setting 32-63
0 64-65
… …
63 190-191
No operation 192-255
r ENABLE / DISABLE
Operation for all channels is not accepted when set to “Disable”.
Performance Parameter Default value
Disable 0-127
0
Enable 128-255
Note
f If the projector is operated using the remote control or the control panel, or by the control command while controlling the projector using the
Art-Net function, the setting of the DMX controller or computer application may be different from the projector status. To reect the controls
of all channels to the projector, set “ENABLE / DISABLE” of channel 11 to “Disable” and then back to “Enable”.
f To create/register the USER LOGO image, use “Logo Transfer Software” included in the supplied CD-ROM.