Panasonic PT-VX425N

Using the FREEZE function
You can freeze the projected image and stop the sound temporarily, regardless of the playing condition of the external device.
button
1) Press the <FREEZE> button on the remote control.
f The video is paused and the audio is muted. [FREEZE] is displayed on the lower left of the screen during FREEZE.
2) Press the <FREEZE> button again.
f The video playback resumes and the audio is unmuted.
Note
f When no signal input, [KEY NOT APPLICABLE] message will appear.
f When [MIC] is set to [ON], the audio of MIC can be output even during FREEZE.
Using the AV MUTE function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the
audio and image temporarily.
button
1) Press the <AV MUTE> button on the remote control.
f The audio and image turn off.
2) Press the <AV MUTE> button again.
f The audio and image turn on.
Note
f When [MIC] is set to [ON], the audio of MIC can be output even during AV MUTE.
Using the P IN P function
(Only for PT-VW355N)
Two images can be projected simultaneously in form of projection mode (a small sub screen in the main screen [P IN P] / a
small sub screen side by side with the main screen [SIDE BY SIDE]).
button
1) Press the <P IN P> button on the remote control.
f Press this button to switch the mode ([P IN P]/[SIDE BY SIDE]).
INPUT A
INPUT A
INPUT B
INPUT A
INPUT B
Main screen
Sub screen
Main screen
Sub screen
Note
f For details, refer to [P IN P] (x page 75).
Switch the input source
You can switch the input source of the main screen and sub screen while the P IN P function is operating.
r Switch the input source of the main screen
Switch the input source as the same operation as the single screen.
r Switch the input source of the sub screen
When two screens are displayed (when no menu is displayed), press the <ENTER> button, the red frame of the sub screen
will be displayed. Switch the input source as the same operation as the single screen.
ENGLISH - 53
Chapter 3 Basic Operations - Basic operations by using the remote control