Panasonic PT-VX425N

[CC3] Displays CC3 data.
[CC4] Displays CC4 data.
Note
f Closed caption is a function that displays text information of video signals mainly used in North America. Captions may not
be displayed depending on the connected devices or contents being played back.
f [CLOSED CAPTION SETTING] can only be selected if an NTSC or 480i YC
BCR signal is input.
f If [CLOSED CAPTION SETTING] is set to [ON], the brightness of image may be changed according to the external devices
or the used content of the closed caption corresponding connection.
f If a closed caption signal of the selected mode is input, the text is not displayed even when the [SECURITY] menu → [TEXT
DISPLAY] (x page 86) is set to [ON].
f Closed captions are not displayed when the menu screen is displayed.
[SCREEN SETTING]
(Only for PT-VW355N)
Set the screen size.
When changing the aspect of a projected image, correct to the optimum image position for the set screen. Set as necessary
for the screen in use.
1) Press as to select [SCREEN SETTING].
2) Press the <ENTER> button.
f The [SCREEN SETTING] screen is displayed.
3) Press as to select [SCREEN FORMAT].
4) Press qw to switch the [SCREEN FORMAT] item.
f The items will switch each time you press the button.
[SCREEN FORMAT] Description Range when [SCREEN POSITION] is selected
[16:10] The projected aspect ratio is 16:10. Cannot be adjusted.
[16:9] The projected aspect ratio is 16:9. Adjusts the vertical position.
5) Press as to select [SCREEN POSITION].
f If [SCREEN FORMAT] is set to [16:10], adjustment of [SCREEN POSITION] is not available.
6) Press qw to adjust the [SCREEN POSITION].
f The items will switch each time you press the button.
[HIGH] The image which aspect ratio is 16:9 will displayed at the top.
[CENTER] The image which aspect ratio is 16:9 will displayed in the center.
[LOW] The image which aspect ratio is 16:9 will displayed at the bottom.
[STARTUP LOGO]
Set the logo display when the power is turned on.
1) Press as to select [STARTUP LOGO].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT LOGO] Displays the Panasonic logo.
[USER LOGO] Displays the image registered by the user.
[OFF] Disables the startup logo display.
Note
f The startup logo will disappear in approximately 30 seconds.
f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
f If you do not register the image of the [USER LOGO], the startup logo will not be displayed even if the [STARTUP LOGO] is
set to [USER LOGO].
72 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu