Panasonic PT-VZ580

Other manuals for Panasonic PT-VZ580

Questions and Answers:

L
Lee NormanSep 6, 2025
Why does image from a computer not appear on my Panasonic PT-VZ580?
- R
  Robert ButlerSep 6, 2025
  If the image from your computer isn't appearing on the Panasonic Projector, check if the cable is too long; for D-Sub cables, it should be 10 m (32'10") or shorter. Also, verify that the external video output on your laptop is set correctly. (The external output settings may be switched by pressing the “Fn” + “F3” or “Fn” + “F10” simultaneously. Refer to your computer's user manual, as the method varies depending on the computer type.)
S
Susan AllenAug 22, 2025
How to troubleshoot a Panasonic PT-VZ580 that won't turn on?
- J
  Jasmin MerrittAug 22, 2025
  If your Panasonic Projector isn't powering on, check these potential solutions: Ensure the power plug is firmly connected to the outlet and that the wall outlet is supplying electricity. Also, verify that the circuit breakers have not tripped. Check if the lamp indicator or temperature indicator is lit or blinking. Finally, confirm that the lamp cover is securely attached.
C
Christopher WrightSep 3, 2025
How to fix fuzzy image on Panasonic PT-VZ580 Projector?
- D
  David CastroSep 4, 2025
  If the image on your Panasonic Projector is fuzzy, first check that the lens cap is removed. Then, verify that the lens focus is correctly set and the projection distance is appropriate. Also, inspect the lens to ensure it is clean, and confirm that the projector is installed perpendicular to the screen.
W
warddeanSep 2, 2025
Why is the audio not outputting from my Panasonic Projector?
- A
  Andrew BrownSep 2, 2025
  If you're not getting any audio from your Panasonic Projector, first, ensure the external device is correctly connected to the audio input terminal, and that the volume isn't set to the minimum level. Also, check that the AV mute and the mute functions are not activated. Verify the audio input selection in [AUDIO SETTING] is correctly set. Note that if a cable is connected to the terminal, the built-in speaker will not output audio.
M
makaylabonillaSep 1, 2025
What to do if no image appears on my Panasonic Projector?
- A
  Ariel LewisSep 1, 2025
  If no image is appearing on your Panasonic Projector, check that all connections to external devices are correctly performed and that the input selection setting is correct. Ensure that the [BRIGHTNESS] adjustment isn't at its minimum. Verify that the external device connected to the projector is working properly and that the AV mute function is not activated.
M
Ms. Alicia BlackAug 30, 2025
What to do if HDMI video is not displaying correctly on my Panasonic Projector?
- M
  Mr. Phillip JohnsonAug 30, 2025
  If video from an HDMI compatible device is not appearing or appears jumbled on your Panasonic Projector, ensure the HDMI cable is securely connected. Try turning the power of both the projector and the external device off and on. Also, verify that the signal input is compatible with the projector.
K
Kevin LeonardAug 29, 2025
Why doesn't the remote control work on my Panasonic Projector?
- C
  carloswoodardAug 29, 2025
  If the remote control for your Panasonic Projector isn't working, try these steps: First, check if the batteries are depleted and replace them if necessary. Ensure the batteries are inserted with the correct polarity. Make sure there are no obstructions between the remote and the projector's signal receiver, and that you are within the remote's effective range. Also, check for interference from fluorescent lights. Confirm that the [REMOTE CONTROLLER] setting in [CONTROL DEVICE SETUP] is not set to [DISABLE] and that the ID number setting operation is correct.
J
Jasmine KelleyAug 27, 2025
What to do if Panasonic Projector remote control does not work?
- T
  tscottAug 27, 2025
  If the remote control for your Panasonic Projector isn't working, first check if the batteries are depleted and ensure their polarity is correctly set. Make sure there are no obstructions between the remote control and the projector's signal receiver, and that you're using the remote within its effective operation range. Also, check for interference from fluorescent light. Finally, confirm that the [REMOTE CONTROLLER] setting in [CONTROL DEVICE SETUP] is not set to [DISABLE], and verify that the ID number setting operation is correct.
R
Ryan CarterAug 27, 2025
Why Panasonic PT-VZ580 Projector power does not turn on?
- M
  morrisongaryAug 27, 2025
  If your Panasonic Projector isn't powering on, make sure the power plug is firmly connected to the outlet and that the wall outlet is supplying electricity. Check if the circuit breakers have tripped. Also, verify if the lamp indicator or temperature indicator is lit or blinking, and ensure the lamp cover is securely attached.
M
Monica BairdAug 25, 2025
How to display image from computer on Panasonic PT-VZ580 Projector?
- C
  Courtney LopezAug 26, 2025
  If you're having trouble displaying an image from a computer on your Panasonic Projector, check if the cable is too long (for D-Sub cables, it should be 10 m (32'10") or shorter). Also, verify that the external video output on the laptop computer is set correctly. (For example, the external output settings may be switched by pressing the “Fn” + “F3” or “Fn” + “F10” simultaneously. Refer to the user manual provided with your computer, as the method varies depending on the computer type.)

Panasonic PT-VZ580 Specifications

General

Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	8 W
Power consumption (typical)	410 W
Matrix size	0.64 \
Optical axis	44 %
Heat dissipation	1399 BTU/h
Number of colors	16.78 million colors
Native aspect ratio	16:10
Projection distance	0.76 - 7.62 m
Projection technology	LCD
Contrast ratio (typical)	16000:1
Screen size compatibility	30 - 300 \
Projector native resolution	WUXGA (1920x1200)
Keystone correction, vertical	-25 - 25 °
Keystone correction, horizontal	-30 - 30 °
Focus	Manual
Throw ratio	1.09 - 1.77:1
Zoom capability	Yes
Focal length range	15.3 - 24.64 mm
Aperture range (F-F)	1.6 - 2.12
Lamp type	UHM
Lamp power	280 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	6000 h
3D	No
Supported video modes	480i, 480p, 720p, 1080i, 1080p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	640 x 400, 640 x 480 (VGA), 720 x 480, 720 x 576, 800 x 600 (SVGA), 1024 x 768 (XGA), 1152 x 864 (XGA+), 1152 x 870, 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1366 x 768, 1400 x 1050 (SXGA+), 1400 x 900, 1600 x 1200 (UXGA), 1600 x 900, 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Housing material	Plastic
Cable lock slot type	Kensington
RMS rated power	10 W
Number of built-in speakers	1
Noise level	37 dB
Noise level (economic mode)	35 dB
Dot clock scanning frequency	162 MHz
Operating altitude	0 - 2700 m
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Ethernet LAN data rates	100 Mbit/s
Serial interface type	RS-232C
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	0
Harmonized System (HS) code	85286200