4-25
VRF SYSTEMS Indoor Unit Specifi cations
2. Low Silhouette Ducted Type (F2 Type)
2-1. Specifi cations
Unit specifi cations (A)
g
g
g
g
*3
:
Network Impedance shall be applicable for EUROPE and CHINA models.
*4
:
The annual consumption is calculated by multiplying the input power at 230V(400V) by an average of 500 hours per year in cooling mode.
*5
:
EER and COP classifi cation is at 230V(400V) only in accordance with EU directive 2002/31/EC.
*
:
In case it is necessary to indicate the air fl ow volume in (l/s), the value in (m
3
/min.) shall be multiplied by 16.7 and rounded down the decimal point.
*
:
If the EUROVENT Certifi ed models can be operated under the "extra-low" temperature condition, -7°C dry bulb and -8°C wet-bulb temperatures with rated voltage
230V shall be used.
TD831172-00VRFSYSINDOOR.indb25TD831172-00VRFSYSINDOOR.indb25 2014/04/2416:49:162014/04/2416:49:16
To Next Page
Loading...
