Panasonic S-36MK2E5A - Menu List; Menu Items

3-7
Control of VRF SYSTEM
1
2
3
4
5
6
7
8
9
1. Operating Instructions
10
(EN)
1
Display the menu screen.
 To return to the previous screen
Press .
 When no operation is performed
in each setting screen for several minutes
The display returns to the top screen.
2
Select the menu item. Ÿ ź ĺ
 To turn the page
Press Ż Ź.
 Selectable menus (1 to 13)
For details of screen examples, see the next page.
Menu List
11
(EN)
 Menu items (1 to 13)
1
Basic instructions
Explains the basic operations. • Press Ż Ź to turn the
page.
P.
8
2
FLAP
*
Sets À aps for each indoor unit.
P. 1 2
3
Lock indiv. À ap
*
Fixes the À ap of a speci¿ c air outlet.
P. 1 3
4
ON/OFF timer
Sets the ON/OFF timer P.14
5
Weekly timer
Sets the operation schedule on a daily basis.
P
.15
6
Filter info
*
Con¿ rms and resets the time to ¿ lter cleaning.
P. 2 0
7
Outing function
Prevents the room temperature from increasing to much (or decreasing too much) when no one is the room.
P
.31
8
Quiet operation
*

Performs quiet operation for outdoor units.
P. 2 2
9
Power consumption monitor
*
Con¿ rms the power consumptions on a daily, weekly or yearly basis.
P. 2 3
10
Energy saving
The energy saving functions shown on the right can be set individually aside from the
(Energy
saving) button.
11
Initial settings
12
Ventilation
*
Sets ventilation operation including the heat exchange ventilation unit.
P. 3 8
13
Setting list
Con¿
rms the meanings of
setting information icons.
P. 3 9
 No. 10 [Energy saving] details
Temp auto return
Restores the temperature after the set time has elapsed even if the temperature is changed.
P. 2 4
Temp range
Restricts the temperature range that can be set.
P. 2 5
Auto shutoff
Sets the auto shutoff timer.
P. 2 6
Schedule peak cut

Determines the time zone for the energy saving operation.
P. 2 8
Repeat off timer
Stops operation after a certain period of time each time operation is performed.
P. 3 0
 No. 11 [Initial settings] details
Clock
Sets the present date and time.
P. 3 3
Clock type
Sets the type of clock display.
P. 3 3
Controller name
Names the remote controller.
P. 3 4
Operation lock
Locks the button operations.
P. 3 3
Touch sound
Turns the operation sound ON/OFF.
P. 3 5
Contrast Sets the screen contrast. Backlight
Sets the backlight brightness of the screen.
Language
Sets the display language for the top screen.
Password change

Sets the administrator password.
P. 3 6
Temp sensor

Sets whether to use the temperature sensor of the remote controller or the indoor units.
P. 3 7
Main/sub

Set this when 2 remote controllers are connected.
P. 3 7
Vent output

Interlocks the ON/OFF of the air conditioner and ON/OFF of the fan.
P. 3 7
Contact address
Con¿ rms the contact address and telephone number for servicing.
P. 3 7
* Depending on the model, some menus cannot
be used. The following display appears.
The administrator password is required for
setting. (P.36)
TD831172-00VRFSYSINDOOR.indb7TD831172-00VRFSYSINDOOR.indb7 2014/06/1316:54:392014/06/1316:54:39