Panasonic S-36MK2E5A - Page 75

2-67
Design of VRF SYSTEM
1
2
3
4
5
6
7
8
9
4. Optional Parts
(5) Setting Changes of DC Fan Tap
Make settings of the wired remote control, timer remote control or indoor unit control P.C. board (using supplied short-circuit
connector) according to separate instructions.
Make settings of 3-way air discharge and 2-way air discharge according to separate instructions.
Do not apply any other block pattern of air outlet as listed below.
3-way air discharge
Capable of blocking
1 direction
( 150)
connecting air outlet duct connection flange
3-way air discharge +
Block one of the air outlet and connect the duct connection flange.
Then the air is discharged from the air discharge duct connection flange.
connecting air outlet duct connection flange
( 150)
2-way air discharge +
Block two (2) air outlet and connect either of the duct connection flanges. Then the air is discharged from the air discharge
duct connection flange. There is, however, only capable of discharging the air from one set of air outlet duct connection
flange.
2-way air discharge
Capable of blocking
2 directions
TDxxxxxx-002WAYVRF.indb67TDxxxxxx-002WAYVRF.indb67 2014/01/3017:52:332014/01/3017:52:33