Panasonic SA-PM19E - Cr16 Mechanism Assembly Procedure

9.24. CR16 MECHANISM ASSEMBLY PROCEDURE
The following specified greases and/or oil must be applied when some specific parts are
changed.
1. Floil grease (VFK1298) : The floil grease must be applied to tray,
tray (L) and tray (R).
2. Hanarl oil (VFK1700) : The hanarl oil must be applied to any parts
with grease other than the said parts.
- Follow the (Step 1) - (Step 6) of Item 9.2.
- Follow the (Step 1) - (Step 3) of item 9.3.
- Follow the (Step 1) - (Step 4) of item 9.5.
- Follow the (Step 1) - (Step 3) of item 9.8.
- Follow the (Step 1) of Item 9.9.
- Follow the (Step 1) - (Step 2) of Item 9.13.
- Follow the (Step 1) - (Step 10) of item 9.23.2.
45