<< >>
: Rec
(( ))
: CD
< >
: FM
( )
: AM
- Importance safety notice :
Components identified by mark have special characteristics
important for safety. Furthermore, special parts which have
purposes of fire-retardant (resistors), high-quality sound
(capacitors), low-noise (resistors), etc. are used. When replacing
any of components, be sure to use only manufacturer's specified
parts shown in the parts list.
Caution !
IC, LSI and VLSI are sensitive to static electricity.
Secondary trouble can be prevented by taking care during repair.
- Cover the parts boxes made of plastics with aluminium foil.
- Put a conductive mat on the work table.
- Ground the soldering iron.
- Do not touch the pins of IC, LSI or VLSI with fingers directly.
16. Schematic Diagram
16.1. CD Servo Circuit
16.2. Main Circuit
16.3. Panel Circuit, Tact Switch Circuit, Switch Circuit and
Headphone Circuit
16.4. Cassette Deck Circuit, Deck Mechanism Circuit and Tape Eject
Circuit
16.5. Power Circuit
16.6. Transformer Circuit and Speaker Terminal Circuit
16.7. CD Loading Circuit
86
To Next Page
Loading...
