36
Troubleshooting
Before calling for service, please check through this section.
Problem
Cause
Action
01 appears on the display.
There has been a power failure for a certain amount of time (differs depending on the
circumstances - e.g. mains power failure, unplugging, malfunctioning fuse or breaker).
Remove the dough and start again using new ingredients.
H01–H02 appears on the
display.
The display indicates a problem with the Bread Maker.
Consult the place of purchase or a Panasonic service centre.
U50 appears on the display.
The unit is hot (above 40°C/105°F). This may occur with repeated use.
Allow the unit to cool down to below 40°C/105°F before using it again (U50 will disappear).
To Next Page
Loading...
