Panasonic WJ-ND400 User Manual (English)

Other manuals for Panasonic WJ-ND400

Installation Guide60 pages

Specification Sheet2 pages

Maintenance Guide2 pages

Questions and Answers:

J
Jeffery PalmerSep 8, 2025
Why does display change to multiple camera images on Panasonic WJ-ND400?
- A
  Alexandria JamesSep 8, 2025
  If the display in one image display area changes to multiple camera images when viewing MPEG-4 images in multiscreen on your Panasonic DVR, first, update the driver of the display adapter. If this does not resolve the problem, use the following procedure to adjust the hardware accelerator function. This is caused by the combination of the PC's display adapter and driver.
C
crosbyaaronSep 10, 2025
What to do if cannot play SD memory data on Panasonic WJ-ND400?
- C
  ccurtisSep 10, 2025
  If you cannot play SD memory data on your Panasonic DVR, and the recording consists of only a few frames, they may not be played back normally. When this happens, click "NEXT IMAGE" / "PREV IMAGE" to display the images.
N
Nicholas RobinsonSep 12, 2025
Why is the refresh of live images unstable on my Panasonic WJ-ND400 DVR?
- J
  jonesmatthewSep 12, 2025
  If the refresh of live images is unstable on your Panasonic DVR, lower the value/rate related to network performance, such as the live transmission rate and the recording rate. If the cameras use different compression formats, the performance may be poor (image update is unstable). The settings may exceed the performance limit of network cable or the recorder's network.
A
Aaron DennisSep 13, 2025
Why are live and recorded MPEG-4 images not displayed normally on Panasonic WJ-ND400?
- M
  mhooverSep 13, 2025
  If live and recorded images in MPEG-4 format are not displayed in a normal manner on your Panasonic DVR, display and recording may be unavailable for up to one minute directly after the recorder is turned on while cameras are active or a LAN cable is connected to the camera port.
M
millertinaSep 15, 2025
Why cannot I play audio using the Viewer software on Panasonic WJ-ND400?
- J
  Jill WardSep 15, 2025
  If you cannot play audio using the Viewer software for your Panasonic DVR, check if an image data (extension: n3r) and an audio data (extension: n3a) are in the same folder. Check the directory designated as the destination folder.

Panasonic WJ-ND400 Specifications

General

HDD size	3.5 \
HDD interface	Serial ATA
Number of HDDs supported	54
Compatible memory cards	SD
Ethernet LAN (RJ-45) ports	1
Supported network protocols	TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, RTP
Power consumption (typical)	170 W
Certification	UL, FCC, CE, C-UL, GOST, DOC
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	5 - 90 %