Panasonic WJ-ND400 - Preventing Illegal Operations; Lock; Cancel

36
Preventing illegal operations
You can lock the buttons on the front panel of the recorder to prevent them from being operated.
1 Press the arrow buttons (up or down) on the front panel.
Continue to press it until [Keylock Mode] is displayed.
2 Press the [SET] button.
[Keylock Enabled] is displayed and Key Lock is set.
1 Press the arrow buttons (up or down) on the front panel.
Continue to press it until [Keylock Mode] is displayed.
2 Press the [SET] button.
[Locked] is displayed and the password entry screen
appears.
3 Enter your password (default is 12345).
• Move the cursor using the arrow buttons (left or right) and
enter values from 0 to 9 using (up or down).
• You can set the password on the setup menu. Refer to
the Setup Instructions (PDF file) for more information.
4 Press the [SET] button.
Key lock is canceled.
Lock Cancel