Camera
52
Use the following procedure to specify the group title of a camera.
1 Click the [Camera] button on the setup menu.
2 Click the [Group] tab.
This will display the "Group Setting" window.
3 Input a group title.
Refer to “Group settings” table for details about the settings.
4 Click the [Set] button.
Group settings
♦Initial default
Group
Item Settings Description
Group title Title input
(Group 1: G1♦ to
Group 8: G8♦)
Specifies the group title of a camera.
• The group title can be made up of up to 16 single-byte
numerals and symbols, or 16 two-byte characters. The
following characters are not allowed as symbols.
"!$%'<=>@[\]^_`{|}~"
To Next Page
Loading...
