42
Schedules
Create a schedule by specifying the day and time to record.
Use the procedure in this section to create a recording program that controls live images, the recording rate, etc.
You can create up to eight recording programs on the recorder.
1 Click the [Schedule] button on the setup menu.
2 On the sub-menu that appears, click [Program].
This will display the schedule program setting window.
3 Click the [Setup >>] button of the program number
whose settings you want to configure.
This will display the program setting window.
Button Functions
4 Configure the settings for each item.
Refer to “Program settings” table for details about the
settings.
• To configure the settings of a camera that is not shown on
the display, click the applicable camera number range
above the [Set] button to change the contents of the
display.
• Clicking a camera number range will save the currently
displayed camera settings.
5 Click the [Set] button.
Program
[Copy] button : Copies the settings of the currently
selected program. Changes the
settings of the currently displayed
window.
[Measurement]
button
: Click to check for proper operation at
the specified recording rate. (page 45)
Important:
• Only the currently displayed page (the selected program) can
be copied.
To Next Page
Loading...
