67
User management
Configure the user and host authentication required to access the recorder from a PC.
It is possible to restrict access by users and hosts (PCs).
Use the following procedure to specify whether user and host authentication should be performed.
1 Click the [User mng.] button on the setup menu.
2 On the sub-menu that appears, click [Basic].
This displays the basic user management settings window.
3 Configure the settings for each item.
Refer to “Basic user management settings” table for details
about the settings.
4 Click the [Set] button.
Basic user management settings
♦Initial default
Basics
Item Settings Description
User authentication Off / On♦ Specifies whether user authentication should be performed.
Host authentication Off♦ / On Specifies whether host authentication should be performed.
• [On] cannot be selected for host authentication unless the
host is registered. First perform settings for the "Hosts
(page 71)".
To Next Page
Loading...
