Panasonic WJ-ND400 - Ddns

Network
64
Use the following procedure to configure settings for using a DDNS (Dynamic Domain Name System).
1 Click the [Network] button on the setup menu.
2 On the sub-menu that appears, click [DDNS].
This will display the [DDNS] setup window.
3 Configure the settings for each item.
Refer to “DDNS settings” table for details about setting items.
4 Click the [Set] button.
DDNS settings
♦Initial default
*1 You can enter the following single-byte alpha-numeric characters and symbols.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9 ! # $ % ` ( ) * + , - . / : ; < = > ? @ [\] ^ _ { | } ~
DDNS
Item Settings Description
DDNS Off♦ / On Specifies whether a DDNS is used.
User name Name input (Blank♦) Enter the user name to be registered on the DDNS.
• Enter up to 32 single-byte alphanumeric characters and
symbols.
*1
Password Password input (Blank♦) Enter the password for the above user name.
• Enter up to 32 single-byte alphanumeric characters and
symbols.
*1
Access interval 10min / 30min / 1h♦ / 6h / 24h Specifies the DNS update interval.
Host name Name input (ND400♦) Enter the host name to be registered on the DDNS.
• Enter up to 255 single-byte alpha-numeric characters,
including hyphen (-) and period (.).