About operating windows
14
(1) Displays the status of live and playback
images.
(2) [REC] indicator
Displays the recording status.
(3) Display the following statuses.
(4) Information about the events and errors is
displayed.
"Alarm suspend [ALARM SUSPEND]" button
"Alarm [ALM]" button
"Error [ERR]" button
Note:
• Emergency recording does not stop even if you click the "Alarm
[ALM]" button while recording. However, recording does stop if
the recording time is set to [Continue] for emergency recording.
Status display area
(1) (3) (4)(2)
: Live images are being displayed.
: Recorded images are being played back.
: Images are being played back reversely.
: Images are being played back at fast
forward.
: Images are being played back reversely
at fast forward.
: Playback is paused.
: Recorded images and audio are being
downloaded.
: Recorded images and audio have been
downloaded.
[Step 1] to [Step 7]
: The playback speed is displayed.
:1x
: Approx. 4x
: Approx. 8x
: Approx. 16x
: Approx. 32x
: Approx. 48x
: Approx. 96x
: The sequence is being activated.
: Normal recording area or event recording
area of the HDD on the recorder is
selected.
: HDD copy area is selected.
: SD memory data is currently being
obtained.
: RAID is being recovered.
: Rec event list is filtered. For details on
filtering of recording event searches, refer
to page 24 for information on conditions
for filtering.
: Recording is being performed.
: Recording is not being performed.
: Camera cannot be operated because a
user with a higher priority is using the
camera.
: Copying is being performed.
: Image data is being deleted.
: Clicking this button to temporarily disable
alarm detection (page 34).
: This indication will be displayed while an
alarm is being suspended.
: Displays when an event occurs. Clicking
this button clears the alarm action
(page 34).
: An error has occurred. Clicking this button
clears the error occurrence. Refer to page
55 for details about errors.
To Next Page
Loading...
