Quick settings
30
Use the following procedure to select the recording program that determines the live image rate, recording rate, and other operations.
1 Click the [Quick] button on the setup menu.
This will display the setting window.
2 Configure the settings for each item.
Refer to “Quick settings 4” table for details about the settings.
3 Click the [Set] button.
Quick settings 4
♦Initial default
Note:
• Performing [Camera registration] sets both the live video rate and manual record rate of [Program1] to [Program8] to "1 ips".
Program settings
Item Settings Description
Program setup Program1♦ to Program8 Selects the recording program.
To check the details of the selected program, click the [Display]
button.
• Refer to "Program (page 42)" for details about programs.
To Next Page
Loading...
