Panasonic WJ-NV200K - Operations Flow

22
Operations flow
z
Connection
☞ Page 23
x
Turn on the recorder
☞ Page 31
c
Obtain the license (Registration Key)
☞ Activation Key Card
v
Register the license
☞ Page 33
b
Quick setup
☞ Page 38
n
Basic setup and
Advanced setup
☞ Pages 41-76
Start operations
➜ ➜
z Connect the recorder to each device.
x Turn on the power of the recorder.
c Enter the "Registration Key" of the recorder by following
the instructions on the provided Activation Key Card.
v Enter the "Registration Key" for the recorder.
Important:
 • Besuretoregisterthe"Registration Key" of the recorder.
b Register the date & time and cameras on "Easy Start".
When it is not necessary to change other default set-
tings, it is possible to start operations. After cameras are
added or replaced, register the cameras on "Easy Start".
n If necessary, perform the detailed settings for each func-
tion.
➜ ➜ ➜ ➜