Panasonic WJ-NV200K - Configure the Minimum Settings [Easy Start]

38
[Date]
Set the current date. Select the year, month and day from
the calendar.
[<<Y]/[Y>>] button: Selects the previous or next year.
[<M]/[M>] button: Selects the previous or next month.
[Time]
Set the current time.
Step 3
Click the [Apply] button after setting the date & time.
→ The second will be set to "00".
Step 4
Click the [Next] button.
→ The camera registration window opens.
Step 5
Register the cameras connected to the recorder.
Note:
 • Beforethesettings,registerthecamerasintothenet-
work.
[New] button
Detects all the connected cameras.
The models and results of the detected cameras will be dis-
played. Make sure that the model numbers of all the con-
nected cameras are being displayed.
The minimum settings required to operate the recorder, such as the date & time, camera registration, recording, can be config-
ured on the setup menu - the "Quick setup" menu - "Easy Start".
First, configure the minimum settings on "Easy Start", and to configure more advanced settings, go to each setup page.
Available settings on "Easy Start"
 • Date&timeoftherecorder
 • Cameraregistration
 • Orderchangeoftheregisteredcameranumbers
 • Recordingframerateandimagequality
* Other settings will remain default or will be conformed to the camera settings.
Configure the minimum settings [Easy Start]
Step 1
Click the [Easy Start] button on the top screen of the setup
menu.
Refer to "Basic operations" (☞ page 35) for how to display
the setup menu.
→ The setup menu for the date & time will be displayed.
Step 2
Set the date & time.