Panasonic WJ-NV200K - Download operation area; CAM Tab Camera Controls

62
■ Other setup
Click the [Advanced >] button to set bandwidth control,
HTTP port number, and FTP port number.
The setup menu (advanced) will be displayed.
[HTTP port number]
Specify the HTTP port number to be used to send images
from the recorder.
It is unnecessary to change it for normal use.
1 - 65535
Default: 80
Note:
 • Dependingonthenetworksettings,networkcommuni-
cation may not be established if the HTTP port number
has been changed. In this case, refer to the administra-
tor of each network.
 • ThefollowingnumbersandtheFTPportnumberare
unavailable for the HTTP port number. 20, 21, 23, 25,
42, 53, 67, 68, 69, 79, 105, 110, 123, 161, 162, 546,
547, 995, 10001, 10002, 10003, 10004, 10005, 10006,
10007
[FTP port number]
Designate the FTP port number of the recorder.
It is unnecessary to change it for normal use.
1 - 65535
Default: 21
Note:
 • ThefollowingnumbersandtheHTTPportnumberare
unavailable for the FTP port number.
20, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110, 123,
161, 162, 546, 547, 995, 10001, 10002, 10003, 10004,
10005, 10006, 10007
[Back] button
Click the button after completing the settings.