2.5.5 Configure the settings relating to images and the preset
positions [Image/Position]
Click the [Image/Position] tab on the “Image/Audio” page. (®For menu display and how to operate, refer to
page 47, page 48)
When the [Setup>>] button of each setting item is clicked, the detailed settings menu will be displayed in a
newly opened window. The detailed settings can be configured while monitoring images displayed on the
[Image/Position] tab.
The settings relating to image adjust, preset positions, auto panning, patrol, auto-tracking, direction/angle,
privacy zone, and VIQS can be configured in this section.
[Image adjust]
Click the [Setup>>] button to display the setup menu that can configure the settings relating to image quality.
The setup menu will be displayed in a newly opened window. (®Page 108)
[Preset position]
Click the [Setup>>] button to display the setup menu that can configure the preset position. The setup menu
will be displayed in a newly opened window. (®Page 120)
Operating Instructions 107
2 Settings
To Next Page
Loading...
