3.1.3 Installing the manuals
On the CD launcher window, click the [Install] button next to [Manual] to display the Manual installation window.
Confirm the following settings before starting the installation.
Select which manuals to install. The camera models that the manuals support are displayed in B “Model
List”.
The camera models that are supported by the manuals selected in A are displayed here.
Select where to create the manuals shortcut icon when the manuals are installed.
Specify which folder on the PC to install the manuals to.
Click the [Install] button to start the installation.
Note
• To uninstall the manuals delete the shortcut icon from where you specified it to be installed (the default
is on the desktop) during installation and the [Manual] folder from the folder (the default is C:
\Panasonic) you specified during installation.
3.1.4 Installing the Viewer software
In order to display H.265 (or H.264) images, send/receive audio to/from the camera, and display logs or play
images saved on the SD memory card, the “Network Camera View 4S” (ActiveX
®
) viewer software must be
installed. On the CD launcher window, click the [Install] button next to [Viewer Software], and follow the
instructions displayed on the window to install the software. A message is displayed if a PC that does not have
the Viewer software installed tries to access the camera. Install the software by following the instructions
displayed on the window. Refer to page 4 for further information.
Note
• To uninstall the Viewer software, follow the steps below depending on the OS used on your PC.
Delete [Network Camera View 4S] from [Control Panel] - [Programs] - [Uninstall a program].
Operating Instructions 245
3 Others
To Next Page
Loading...
