Panasonic WV-X6531N - 2.8.2 Configure the settings relating to the host authentication [Host auth.]

– Guest User: All are not checked
Note
• If you have set “User authentication” to “Off”, and “Guest User” to “Not use”:
The “Access Level” item cannot be set. And, while all the live operation buttons are displayed, the
[Setup] buttons require authentication.
• If you have set “User authentication” to “Off”, and “Guest User” to “Use”:
You can set the items for “Guest User”.
• If you have set “User authentication” to “On”:
You cannot set the items for “Guest User”.
You can set the following functions.
Live view selectable Selecting an image displayed in the live view setting permissions
Listen Mic Input (To PC) (when listening on a PC) setting permissions
(®page 16)
Talk Audio output (From PC) (when talking from a PC) setting permissions
(®page 16)
Refresh Rate
JPEG format image refresh interval setting permissions (®page 13)
Snap shot
Snap shot operation permissions (®page 15)
Playback of recording (Log
disp.)
Log operation permissions (®page 13)
Manual rec./Delete rec.
SD memory card save/delete permissions (®page 13)
Preset
Operation permissions for moving the preset positions (®Page 15)
Pan/Tilt
Pan/tilt operation permissions (®Page 15)
Zoom
Zoom operation permissions (®Page 13)
Focus
Focus operation permissions (®Page 14)
Auto mode
Auto mode operation permissions (®Page 14)
Brightness
Brightness setting permissions (®Page 15)
AUX
AUX setting permissions (®Page 13)
2.8.2 Configure the settings relating to the host authentication
[Host auth.]
Click the [Host auth.] tab on the “User mng.” page. (®For menu display and how to operate, refer to
page 47, page 48)
Operating Instructions 177
2 Settings