[Alarm area No.]
• Available range: 1-4
• Default: 1
IMPORTANT
• When entering the host name of the “Destination server address”, the DNS settings on the [Network]
tab of the “Network” page must be configured. (®page 180)
• Confirm that the destination IP addresses are registered correctly. When a registered destination does
not exist, notification may be delayed.
2.7.8.2 Configure the settings relating to HTTP alarm notification
HTTP alarm notification
[Address 1] - [Address 5]
Enter the destination IP address or host name of the HTTP alarm notification. Up to 5 destination server
addresses can be registered.
• Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the
hyphen (-).
• Default: http://
Example of entry: “http://IP address of the HTTP server + : (colon) + port number” or “http://Host name: (colon)
+ port number”
[Alarm] checkbox
When the checkbox is checked, the HTTP alarm notification will be provided upon an alarm occurrence.
172 Operating Instructions
2 Settings
To Next Page
Loading...
